peinture
2 participants
peinture
apres avoir appliquer le pre-kote de interluxe sous couche faut sabler pour pouvoir appliquer la finition de interlux ou directement sur la surface deja peinte avec la sous couche
merci richard
merci richard
richard cousineau- Messages : 5
Date d'inscription : 17/03/2013
Re: peinture
Excusez l'english !!!
Apply 1-2 coats. Depending on surface condition. Allow the necessary overcoating time between applications. Sand
between primer coats with 120 grade (grit) paper until translucent. Remove sanding residue with a rag dampened with
Brushing Liquid 333. Apply finish coats. Sand with 220 grade (grit) paper between Pre-Kote* and finish enamel.
instructions complètes sur le data sheet ici : http://www.yachtpaint.com/usa/diy/products/productdatasheets.aspx?ProductID=3015
Apply 1-2 coats. Depending on surface condition. Allow the necessary overcoating time between applications. Sand
between primer coats with 120 grade (grit) paper until translucent. Remove sanding residue with a rag dampened with
Brushing Liquid 333. Apply finish coats. Sand with 220 grade (grit) paper between Pre-Kote* and finish enamel.
instructions complètes sur le data sheet ici : http://www.yachtpaint.com/usa/diy/products/productdatasheets.aspx?ProductID=3015
peinture
merci pour le site et la reponse
richard cousineau- Messages : 5
Date d'inscription : 17/03/2013
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum
|
|